0.5 to 8bar SPDT Zinc Die-Cast Pressure Switch Replacement for Barcontrol PDS-1-008-M-2-1 Premium Quality with 3-Year Warranty

0.5 to 8bar SPDT Zinc Die-Cast Pressure Switch Replacement for Barcontrol PDS-1-008-M-2-1 Premium Quality with 3-Year Warranty

Replacement Part Number: PDS-1-008-M-2-1, PDS1008M21

Feature:
This is a mechanical pressure switch with changeover (SPDT (single pole, double throw)) contacts. They are composed of a normally closed contact pair and a normally open contact pair. The setpoint is the pressure value where the switch activates and the reset point is the value at which the switch deactivates when the pressure decreases. The setpoint can be adjusted between 0.5 and 8 bar (7 and 116 psi). The maximum overpressure is 60 bar (870 psi). It has a switch hysteresis (the difference between setpoint and reset point) of 10 - 15%. The switching capacity for this pressure switch is 3 A @ 24 V DC or 6 A @ 250 V AC. It can be connected to an electrical network with a DIN-A connector. This pressure switch is made in a diaphragm design with a zinc die-cast body and an NBR seal. It is suitable for various media, such as compressed air, hydraulic oil, water and in a temperature range from -20 to 80°C (from -4 to 176°F). The connection port has a size of G 1/4 inch with female threads. The pressure switch has an IP65 rating.

Specification:
Connection size: 1/4 inch
Material: Zinc die-cast
Seal material: NBR (nitrile rubber)
Contacts: Changeover contact
Max. overpressure: 60 bar
Max switch capacity: 3 A / 24 V DC, 6 A / 250 V AC
Switch hysteresis: 10–15%
Max pressure: 8 bar
Min pressure: 0.5 bar
Connection type: Inner thread cylindrical BSPT-Rp
Pressure sensor feature: With adjustment wheel
Min temperature: –20°C
Max temperature: 80°C
Electrical connection: DIN-A
Degree of protection (IP): IP65
Suitable for ammonia: No
Suitable for air: Yes
Suitable for oil: Yes
Suitable for water: Yes
Suitable for steam: No
Suitable for gases: No
Suitable for glycol: No
Measuring element: Membrane