36-48V 500A DC Motor Controller 1205M-5606 17721709 for Curtis

36-48V 500A DC Motor Controller 1205M-5606 17721709 for Curtis

Replace Part Number:1205M-5606, 1205M5606

Specification:
1205M-5606 is the newest. 48V / 500A / 0-5kΩ
Norminal Battery Voltage (Volts): 36/48 (Two voltage settings are available. The voltage can be set to either 36 volts or 48 volts. By defaut, it is set as 48 volts, with an allowable working range 33-48V. If it is set as 36 volts, the allowable working range is 25-36V). The buyer should confirm with the seller the battery system voltage and the throttle type (0-5kΩ, 5k-0Ω or 0-5V).
By defaut, we will the controller of setting of 48V / 500A / 0-5kΩ.
1 Minute Current Rating (amps): 500
5 Second Boost Current (amps): 600
1 Hour Current Rating (amps): 175
Plug Braking (A2 Busbar): Yes
SPECIFICATIONS: 1205M CONTROLLERS
Nominal input voltage: 36/48 V (1205M-5606 has two available battery voltage settings. The voltage can be set to either 36 volts or 48 volts.)
PWM operating frequency: 15 kHz
Electrical isolation to heatsink (min.): 500 V
KSI input current (no contactors engaged): < 60 mA without programmer; <130 mA with programmer
Logic input current: <1 mA
Status LED output current (max.): 2 mA
Throttle type: 2-wire 0 – 5kΩ, 2-wire 5kΩ – 0, or 0 – 5V
Storage ambient temperature range: -40°C to 85°C (-40°F to 185°F)
Operating ambient temp. range: -40°C to 50°C (-40°F to 122°F)
Package environmental rating: ISTA 2A; electronics sealed to IP65
Regulatory compliance: Safety — Designed to the requirements of EN 1175; EMC — Designed to the requirements of EN 12895 and EN 61000.