Blade Type 0-100PSI Datcon 240-33 Ohm With 20PSI Alarm Oil Pressure Sender

Blade Type 0-100PSI Datcon 240-33 Ohm With 20PSI Alarm Oil Pressure Sender

Specification:
Stewart-Warner type oil pressure sender.
blade type terminals so there is no chance to break for the terminals
Input: 0-100 psi.
Output: 240-33 ohms resistance. Case grounded. Stewart-Warner type.
S - signal output blade.
WR - Low 20 psi alarm switch.
Ground - case;
when pressure is bigger than 20 psi, the WR switch will be open, when pressure is smaller 20 psi, the WR switch will be closed, or connect to ground.
Accuracy: within 5% full scale.
Thread: 1/8”-27 NPT. See our fitting set for other thread size below.
White zinc environment friendly plated, RoHS compliant.
Wiring connectors: 8-32 stud, with blades and socket.
Symbols: S for signal, should use wide blade, G for grounding.
Hardware bag include: sockets, insulating sleeves.
Dimensions: body diameter 1.76", body length 1.5", total length 3".